-40%

Creality Ender 5 Plus Acrylic Enclosure Box/Case/Cover Kit

$ 184.27

Availability: 100 in stock
  • Type: Enclosure
  • Brand: 3D UP Fitters
  • Condition: New
  • All returns accepted: ReturnsNotAccepted

    Description

    3D Printer Not Included
    Have you
    r?  Let
    The Ender 5 Plus is the larger, better cousin of the Ender 5. Gone is the cantilevered bed, replaced by dual Z-motors with stabilizers on all for corners. Instead of manual bed leveling, the included BLTouch gives a perfect first layer every time.
    But the part that's most exciting to use at 3DUPFitters is what's the same for the entire Ender series: they are perfect for enclosing in a box/case/cover.  While keeping the electronics cool is problematic (more on that later) keeping the hot end at the top means a consistent enclosure temperature.  As the printed piece gets larger, the previously printed section of the part moves lower, but the enclosure also heats up.  In the end, it's much easier to print large parts in temperature-sensitive filament such as ABS while avoiding warping and cracking.
    The biggest design challenge of enclosing the Ender 5 Plus is the power supply and electronics are inside a case. If you just stick the printer in a box it will overheat. Instead, we custom designed an air scoop that brings in cold air to the power supply and electronics, keeping them cool no matter the temperature inside the enclosure. The airflow keeps a mild negative pressure while maintaining good temperatures for both PLA and ABS.
    The one weird thing about the Ender 5 Plus is the placement of the spool holder on the back.  We designed three different prototypes, each trying to make it easier depending on how you like to access the printer.  If you've got enough room to walk behind the printer there's a large access door to load and unload filament or work on the extruder.   If you don't, we made the front door tall enough with enough clearance that you can easily access the bed OR replace the filament from that direction as well.
    Direct Drive Conversions
    Lots of customers are modifying their Ender 5 Plus printers, and we've designed this enclosure with that in mind.  There is plenty of room at the top of all sorts of 3rd party hot ends that those from Bondtech and MicroSwiss.  But you'll definitely want to of the ins and outs of using an enclosure with an H-frame printer converted to direct drive.
    Advantages of adding a
    3D
    UPfitters
    enclosure:
    Better quality prints because the ambient temperature is controlled
    Keeps the power supply cool while the interior is hot enough for consistent prints with advanced material
    More flexibility to print different types of filaments, including ABS
    Designed to accommodate direct drives like the and
    Compatible with the
    Optional fume filter or vent to the outside (both sold separately)
    Thick 6mm acrylic doors and 3mm sides
    The enclosure works by retaining the heat from the bed to bring the ambient temperature up high enough so that ABS and other filaments that expand when they cool are stabilized.  If your main concern is the smell of melting plastic, it can be mitigated using an optional carbon filter.  But if you are more interested in improving overall indoor air quality, a better solution is to vent to the outside via a hose. (not included).  If you just want the highest possible enclosure temperature for ABS just put on the included air vent cover and it'll heat up as hot as possible.
    Internal temperatures during printing with the fan turned on with a room temperature of 72F.
    ABS is 43C/109F
    PLA is 32C/91F
    How it's Built
    All of the plastic parts are 3D printed in ABS
    to withstand the heat from the enclosure. The panels are cut on a US-made industrial laser and then flat-packed for your assembly.   All you need to put it together is a hex wrench and a small Phillips head screwdriver.  (not included.)
    Specifications
    Outside dimensions
    28.5" (Depth), 29" (Width), 31" (Height).
    Fits the Creality Ender 5 Plus ONLY.
    The front door is big enough for the bed to be removed.
    6mm acrylic front panel with frame, doors, injection-molded hinges, magnetic latch, custom-designed latch mount in ABS, steel strike plates, and matching screws.
    3mm acrylic sides and top with access ports for cables and filament.
    .
    This is no spool holder since that is internal to the enclosure.
    5V 80x80mm fan.  (if you don't wish to vent.)
    180 screws, nuts, bolts, all connecting plastic pieces, and miscellaneous parts.
    Sold Separately
    DOES NOT INCLUDE THE 3D PRINTER!
    Upgrade to an and fan to reduce fumes.
    Upgrade the plastic knob to .
    on the front or sides!
    The will send potentially dangerous and definitely odorous fumes outside.  We supply the fan and 4" dryer hose adapter, you get the rest of the parts from your local hardware store.
    Interior LEDs
    Want something different?  Request a .
    Are you desperate enough to read the ?